Our standard painting proceedures are powder coating and anodization.
Both proceedures allow a large variety of colors or effects to be achieved.
Anodized finishes can get pre treatents like polishing or brushing the extrusions to achieve the perfect look.
Powder coatings can be flat, glossy, smoth, textured and pre-treated for marine environments.
Wood grain effects are also availbe for the aluminum extrusions.
FULL Standard RAL or NCS color ranges are available, beside of custom mixtures and color to match a sample provided.
*Custom colors upon request
DP +/- 60 psf rated and tested in accordance with AAMA/WDMA/CSA 101/I.S.2/A440-05
Impact and Cycling tested in accordance to ASTM E1886, E1996 and TAS 201 & 203
(Test Specimen Size: 226 1/2” w x 96” h Overall)
Test Pressure +1.57 psf = 0.000 (ft3/min-ft2)
Test Pressure +6.24 psf = 0.025 (ft3/min-ft2)
Test Results for out-swing unit:
Test Pressure +1.57 psf = 0.00 (ft3/min-ft2)
Test Pressure +6.24 psf = 0.06 (ft3/min-ft2) )
Sizes / Options
Basic Size Limitations:
System Panel Width:
Max. 36" (900 mm) (within the state of Florida)
Max. 43" (1100 mm) (outside the state of Florida)
Max. 8´ (2400 mm) (within the state of Florida)
Max. 10´ (3000 mm) (outside the state of Florida)
176 lbs/panel (80 kg/panel)
Note: Those informations are basic limitations. All oversized units on request only.
The options list is almost endless, since we can upgrade our products to almost all customer needs.
Just to name a few options:
- Egress door hardware
- Locksets as needed
- Door closers
- Custom handle solutions
- Thousands of Glass types available
- Different Track Types (raised sill, recessed flush sill,...)
- midrails, muntins, ...
- matching fixed, tilt, turn or tilt and turn windows/doors